Compression Stop End Caps

Compression Stop End Caps

Use these compression stop end caps to block off an unused pipe.

Compression plumbing fittings do not require solder. The joint is formed by tightening a nut and olive onto a pipe, compressing the olive onto the pipe which forms the seal. They can be used on wet pipework, and are suitable for hot and cold systems.

 

  • 10mm Compression Stop End Cap

    Use to blank off an unused 10mm pipe. Brass compression plumbing fitting, made to the European standard EN1254. Compression plumbing fittings do not require heat or solder. The joint is formed by tightening a nut and compressing the olive (included with fitting) onto a pipe, which forms the se…

    £0.57

    £0.57

  • 15mm Compression Fitting Blanking Disc

    15mm blanking disc / disk. Use this disk inside a 15mm compression plumbing fitting to blank it off. Sometimes comes with the middle part solid, instead of hollow like the picture - depends on what our suppliers send us, doesn't make any difference to operation.    

    £0.43

  • 15mm Compression Stop End Cap

    Use this to blank off an unused 15mm pipe. Brass compression fitting, made to the European standard EN1254. Compression plumbing fittings do not require heat or solder. The joint is formed by tightening a nut and compressing the olive (included with fitting) onto a pipe, which forms the seal. …

    £1.26

    £1.26

  • 22mm Compression Fitting Blanking Disc

    22mm blanking disc / disk.  Use this disk inside a 22mm compression plumbing fitting to blank it off.  Sometimes comes with the middle part solid, instead of hollow like the picture - depends on what our suppliers send us, doesn't make any difference to operation.  &nbs…

    £0.77

  • 22mm Compression Stop End Cap

    Use to blank off an unused 22mm pipe. Made to the European EN1254 standard. Compression plumbing fittings do not require heat or solder. The joint is formed by tightening a nut and compressing the olive (included with fitting) onto a pipe, which forms the seal. They can be used on wet pipework…

    £2.16

    £2.16

  • 28mm Compression Fitting Blanking Disc

    28mm blanking disc / disk. Use this disk inside a 28mm compression plumbing fitting to blank it off. Sometimes comes with the middle part solid, instead of hollow like the picture - depends on what our suppliers send us, doesn't make any difference to operation.    

    £1.22

  • 28mm Compression Stop End Cap

    Use to blank off an unused 28mm pipe. Brass compression plumbing fitting, made to the European standard EN1254. Compression plumbing fittings do not require heat or solder. The joint is formed by tightening a nut and compressing the olive (included with fitting) onto a pipe, which forms the se…

    £3.45

    £3.45

  • 8mm Compression Stop End Cap

    Use to blank off an unused 8mm pipe. Brass compression plumbing fitting, made to the European standard EN1254. Compression plumbing fittings do not require heat or solder. The joint is formed by tightening a nut and compressing the olive (included with fitting) onto a pipe, which forms the sea…

    £0.57

    £0.57

95
Loading
Top