Immersion Heaters

Immersion Heaters

Electric immersion heater elements and spare parts.

  • 11" Immersion Heater Element 3kW

    11" Immersion Heater Element 3kW

    Short (11 inch) 3kW immersion heater element for Willis type heaters or economy 7 hot water cylinders.

    NOT suitable for use with stainless steel cylinders.

    £14.31

    11" Immersion Heater Element 3kW

    11" Immersion Heater Element 3kW

    Short (11 inch) 3kW immersion heater element for Willis type heaters or economy 7 hot water cylinders.

    NOT suitable for use with stainless steel cylinders.

    £14.31

  • 11" Immersion Heater Thermostat With Cut-out

    11" Immersion Heater Thermostat With Cut-out

    Universal 11 inch immersion heater thermostat.

    Temperature adjusts up to 70C

    Suits 18 inch immersion heater elements.

    Metal part is approx 11 inches long.

    £9.06

    11" Immersion Heater Thermostat With Cut-out

    11" Immersion Heater Thermostat With Cut-out

    Universal 11 inch immersion heater thermostat.

    Temperature adjusts up to 70C

    Suits 18 inch immersion heater elements.

    Metal part is approx 11 inches long.

    £9.06

  • 16A Pull Cord Ceiling Switch With Neon Double Pole

    16A Pull Cord Ceiling Switch With Neon Double Pole

    16A / 16 Amp double pole ceiling pull cord switch with neon ON indicator.

    Typically used to control an immersion heater, though useful for many applications.

    Comes with surface mounting box.

    £6.94

    16A Pull Cord Ceiling Switch With Neon Double Pole

    16A Pull Cord Ceiling Switch With Neon Double Pole

    16A / 16 Amp double pole ceiling pull cord switch with neon ON indicator.

    Typically used to control an immersion heater, though useful for many applications.

    Comes with surface mounting box.

    £6.94

  • 18" Immersion Heater Thermostat With Cut-out

    18" Immersion Heater Thermostat With Cut-out

    Universal immersion heater thermostat.

    Temperature adjusts up to 70C

    Suits 27 - 30 and 36 inch immersion heater elements.

    Metal part is approx 18 inch long.

    £9.36

    18" Immersion Heater Thermostat With Cut-out

    18" Immersion Heater Thermostat With Cut-out

    Universal immersion heater thermostat.

    Temperature adjusts up to 70C

    Suits 27 - 30 and 36 inch immersion heater elements.

    Metal part is approx 18 inch long.

    £9.36

  • 20A Water Heater Switch With Neon

    20A Water Heater Switch With Neon

    20A / 20 Amp double pole water heater switch with neon ON indicator.

    £6.21

    20A Water Heater Switch With Neon

    20A Water Heater Switch With Neon

    20A / 20 Amp double pole water heater switch with neon ON indicator.

    £6.21

  • 20A Water Heater Switch With Neon & Flex Outlet

    20A Water Heater Switch With Neon & Flex Outlet

    20A / 20 Amp double pole water heater switch with neon ON indicator and flex outlet.

    £5.55

    20A Water Heater Switch With Neon & Flex Outlet

    20A Water Heater Switch With Neon & Flex Outlet

    20A / 20 Amp double pole water heater switch with neon ON indicator and flex outlet.

    £5.55

  • 27" Immersion Heater Element 3kW

    27" Immersion Heater Element 3kW

    3kW immersion heater element and thermostat.

    Only for use in copper cylinders, NOT suitable for stainless steel cylinders.

    Only available to UK customers (it's too big for airmail).

    £21.79

    27" Immersion Heater Element 3kW

    27" Immersion Heater Element 3kW

    3kW immersion heater element and thermostat.

    Only for use in copper cylinders, NOT suitable for stainless steel cylinders.

    Only available to UK customers (it's too big for airmail).

    £21.79

  • 7" Immersion Heater Thermostat With Cut-out

    7" Immersion Heater Thermostat With Cut-out

    Universal immersion heater thermostat, suits 11 inch immersion heater element.

    Temperature adjusts up to 70C (approx).

    Metal part is approx 7 inches long.

    £8.66

    7" Immersion Heater Thermostat With Cut-out

    7" Immersion Heater Thermostat With Cut-out

    Universal immersion heater thermostat, suits 11 inch immersion heater element.

    Temperature adjusts up to 70C (approx).

    Metal part is approx 7 inches long.

    £8.66

  • Horstmann E15 Immersion Heater Run-back Timer

    Horstmann E15 Immersion Heater Run-back Timer

    This Horstmann E15 electrisaver is a push button electronic timer that saves energy by switching off when you forget.

    Designed to be a replacement for a standard wall mounted double pole switch, this timer can be set to switch off after 15, 30 or 60 minutes.

    £31.50

    Horstmann E15 Immersion Heater Run-back Timer

    Horstmann E15 Immersion Heater Run-back Timer

    This Horstmann E15 electrisaver is a push button electronic timer that saves energy by switching off when you forget.

    Designed to be a replacement for a standard wall mounted double pole switch, this timer can be set to switch off after 15, 30 or 60 minutes.

    £31.50

  • Immersion Heater / General Purpose Timer 24 Hour

    Immersion Heater / General Purpose Timer 24 Hour

    General purpose / immersion heater 24 hour time switch with manual on/off and clock operation.

    The unit has electro-mechanical operation and features a clock face with easy set tappets that activate switching at pre-set times.

    £23.91

    Immersion Heater / General Purpose Timer 24 Hour

    Immersion Heater / General Purpose Timer 24 Hour

    General purpose / immersion heater 24 hour time switch with manual on/off and clock operation.

    The unit has electro-mechanical operation and features a clock face with easy set tappets that activate switching at pre-set times.

    £23.91

  • Immersion Heater Box Spanner

    Immersion Heater Box Spanner

    Heavy gauge steel box wrench with tommy bar, just the tool you need to remove or install an immersion heater element from a hot water cylinder.

    Suits standard immersion heater elements (approx 85mm across flats on nut).

    £6.84

    Immersion Heater Box Spanner

    Immersion Heater Box Spanner

    Heavy gauge steel box wrench with tommy bar, just the tool you need to remove or install an immersion heater element from a hot water cylinder.

    Suits standard immersion heater elements (approx 85mm across flats on nut).

    £6.84

  • Immersion Heater Element Mechanical Flange

    Immersion Heater Element Mechanical Flange

    This mechanical flange adapts a copper cylinder to accept an immersion heater element.

    Standard immersion heater 2-1/4 inch BSP thread.

    £13.71

    Immersion Heater Element Mechanical Flange

    Immersion Heater Element Mechanical Flange

    This mechanical flange adapts a copper cylinder to accept an immersion heater element.

    Standard immersion heater 2-1/4 inch BSP thread.

    £13.71

  • Immersion Heater Element Solder Flange 2-1/4" BSP

    Immersion Heater Element Solder Flange 2-1/4" BSP

    Immersion heater element brass solder flange, adapts a copper cylinder to accept an immersion heater.

    Standard immersion heater 2-1/4 inch BSP thread.

    £3.54

    Immersion Heater Element Solder Flange 2-1/4" BSP

    Immersion Heater Element Solder Flange 2-1/4" BSP

    Immersion heater element brass solder flange, adapts a copper cylinder to accept an immersion heater.

    Standard immersion heater 2-1/4 inch BSP thread.

    £3.54

  • Immersion Heater Element Washer

    Immersion Heater Element Washer

    The size of this immersion heater washer relates to a British Standard Pipe Thread. It fits over a 2-1/4 inch BSP thread.

    Approx 66mm inside diameter.

    Use with some boss white jointing paste to make a good job.

    £0.76

    Immersion Heater Element Washer

    Immersion Heater Element Washer

    The size of this immersion heater washer relates to a British Standard Pipe Thread. It fits over a 2-1/4 inch BSP thread.

    Approx 66mm inside diameter.

    Use with some boss white jointing paste to make a good job.

    £0.76

  • Immersion Heater Plug

    Immersion Heater Plug

    2-1/4 inch BSP immersion heater plug and washer.

    This brass plug is used to blank off the hole left when the immersion heater is removed from a copper hot water cylinder.

    Dimension across the threads are approx 65.7mm.

    £4.64

    Immersion Heater Plug

    Immersion Heater Plug

    2-1/4 inch BSP immersion heater plug and washer.

    This brass plug is used to blank off the hole left when the immersion heater is removed from a copper hot water cylinder.

    Dimension across the threads are approx 65.7mm.

    £4.64

  • Immersion Heater Spanner

    Immersion Heater Spanner

    Galvanised, cranked immersion spanner.

    Suits standard immersion heater elements (approx 85mm across flats on nut).

    £3.69

    Immersion Heater Spanner

    Immersion Heater Spanner

    Galvanised, cranked immersion spanner.

    Suits standard immersion heater elements (approx 85mm across flats on nut).

    £3.69

  • Redring TAP1 Instant Hot Water Mixer Tap

    Redring TAP1 Instant Hot Water Mixer Tap

    The TAP1 plug-in mixer tap from Redring offers a simple, yet highly effective and efficient solution to an every day need. It is a mixer tap that, as the name suggests can plug into any domestic UK plug socket or fused spur, providing instant hot water for hand washing anywhere that it is…

    £58.97

    Redring TAP1 Instant Hot Water Mixer Tap

    Redring TAP1 Instant Hot Water Mixer Tap

    The TAP1 plug-in mixer tap from Redring offers a simple, yet highly effective and efficient solution to an every day need. It is a mixer tap that, as the name suggests can plug into any domestic UK plug socket or fused spur, providing instant hot water for hand washing anywhere that it is…

    £58.97

  • Willis Immersion Heater | Shell & 3kW Element

    Willis Immersion Heater | Shell & 3kW Element

    Willis type external immersion heater.

    Copper shell, 3kW element and thermostat.

    Mounted externally to the main hot water cylinder, this is used to heat domestic hot water in a vented system.

    This is supplied un-assembled (as shown in picture).

    £39.30

    Willis Immersion Heater | Shell & 3kW Element

    Willis Immersion Heater | Shell & 3kW Element

    Willis type external immersion heater.

    Copper shell, 3kW element and thermostat.

    Mounted externally to the main hot water cylinder, this is used to heat domestic hot water in a vented system.

    This is supplied un-assembled (as shown in picture).

    £39.30

  • Willis Immersion Heater Shell

    Willis Immersion Heater Shell

    Empty copper cylinder / shell for Willis type external immersion heater, use with an 11 inch immersion element.

    15mm compression pipe connections and 2-1/4 inch BSP thread for heater element.

    £33.85

    Willis Immersion Heater Shell

    Willis Immersion Heater Shell

    Empty copper cylinder / shell for Willis type external immersion heater, use with an 11 inch immersion element.

    15mm compression pipe connections and 2-1/4 inch BSP thread for heater element.

    £33.85

176
Top