Speedfit Fittings

Speedfit Fittings

John Guest Speedfit is a push-fit system suitable for the plumbing of hot and cold water services and central heating applications, including pressurised and combi systems.

Speedfit fittings have been designed for use with both Speedfit and copper pipe.

Note, you need to use a liner to strengthen / stiffen Speedfit pipe when using it with these fittings.

If you are using copper pipe, make sure there are no sharp edges to damage the rubber seals in the fittings


  • Speedfit 15mm Elbow | PEM0315W

    15mm Speedfit elbow. Speedfit push-fit plumbing fittings are suitable for both copper and Speedfit pipe in normal UK domestic plumbing and heating systems.   A unique locking system using stainless steel teeth grips the pipe and an ‘O’ ring provides a leak proof seal. …

    £1.94

    £1.94

  • Speedfit 15mm Pipe Insert / Liner | TSM15N

    15mm Speedfit pipe liner / stiffener, needed in the end of your speedfit plastic pipe to strengthen it where it goes into a fitting.  

    £0.31

    £0.31

  • Speedfit 15mm Stem Elbow | PEM221515W

    15mm Speedfit stem elbow. Speedfit push-fit plumbing fittings are suitable for both copper and Speedfit pipe in normal UK domestic plumbing and heating systems.   A unique locking system using stainless steel teeth grips the pipe and an ‘O’ ring provides a leak proof se…

    £3.68

  • Speedfit 15mm Stop End Cap | PSE4615W

    Use to blank off an unused 15mm pipe. Speedfit push-fit plumbing fittings are suitable for both copper and Speedfit pipe in normal UK domestic plumbing and heating systems.   A unique locking system using stainless steel teeth grips the pipe and an ‘O’ ring provides a leak pr…

    £2.19

  • Speedfit 15mm Straight Coupler | PEM0415W

    Speedfit 15mm straight coupler / connector.   Speedfit push-fit plumbing fittings are suitable for both copper and Speedfit pipe in normal UK domestic plumbing and heating systems.   A unique locking system using stainless steel teeth grips the pipe and an ‘O’ …

    £1.63

    £1.63

  • Speedfit 15mm Tap Connector | PSE3201W

    Speedfit 15mm tap connector. 15mm pipe in one end, female ½″ BSP thread on the other. Suits sink/basin taps and toilet float valves. See BSPT link at the bottom of this page for more info on thread sizes. Speedfit push-fit plumbing fittings are suitable for both cop…

    £1.81

  • Speedfit 15mm Tee | PEM0215W

    Speedfit 15mm equal tee. Speedfit push-fit plumbing fittings are suitable for both copper and Speedfit pipe in normal UK domestic plumbing and heating systems.   A unique locking system using stainless steel teeth grips the pipe and an ‘O’ ring provides a leak proof seal. &n…

    £2.80

    £2.80

  • Speedfit 22mm Pipe Insert / Liner | TSM22N

    You'll need one of these strengthening inserts / liners in the end of your 22mm Speedfit plastic pipe.

    £0.38

    £0.38

  • Speedfit 22mm Stop End | PSE4622W

    Blanks off an unused 22mm pipe.   Speedfit push-fit plumbing fittings are suitable for both copper and Speedfit pipe in normal UK domestic plumbing and heating systems.   A unique locking system using stainless steel teeth grips the pipe and an ‘O’ ring provides …

    £2.66

    £2.66

  • Speedfit 22mm Tap Connector | PSE3202W

    Speedfit 22mm tap connector. 22mm pipe in one end, female ¾″ BSP thread on the other. Suits bath taps. See BSPT link at the bottom of this page for more info on thread sizes. Speedfit push-fit plumbing fittings are suitable for both copper and Speedfit pipe in norma…

    £2.71

162
Loading
Top