Water Hammer

Water Hammer

In domestic plumbing water hammer is experienced as a loud banging, resembling a hammering noise.

Water hammer is caused when a pipe is suddenly closed at the outlet (downstream), the mass of water before the closure is still moving, thereby building up high pressure and a resulting shock wave.

Water hammer can cause pipelines to break if the pressure is high enough.

  • Water Hammer / Shock Arrestor 1/2" BSP

    Water Hammer / Shock Arrestor 1/2" BSP

    Water hammer arrestor with 1/2 inch BSP male connection.

    This device incorporates a steel spring and plastic disc with double o-ring seal, which opposes much of the excess pressure created by water hammer.

    £30.17

    Water Hammer / Shock Arrestor 1/2" BSP

    Water Hammer / Shock Arrestor 1/2" BSP

    Water hammer arrestor with 1/2 inch BSP male connection.

    This device incorporates a steel spring and plastic disc with double o-ring seal, which opposes much of the excess pressure created by water hammer.

    £30.17

  • Sioux Chief Minirester Washing Machine Water Hammer Arrestor

    Sioux Chief Minirester Washing Machine Water Hammer Arrestor

    Sioux Chief minirester for washing machine or dishwasher.

    3/4 inch BSP threaded connection (standard washing machine hose thread).

    The Sioux Chief water hammer arrestor is a perfect solution for thumping or banging pipes.

    £27.91

    Sioux Chief Minirester Washing Machine Water Hammer Arrestor

    Sioux Chief Minirester Washing Machine Water Hammer Arrestor

    Sioux Chief minirester for washing machine or dishwasher.

    3/4 inch BSP threaded connection (standard washing machine hose thread).

    The Sioux Chief water hammer arrestor is a perfect solution for thumping or banging pipes.

    £27.91

  • 6" Ball Float For 1/2" or 3/4" Ballcock / Float Valve

    6" Ball Float For 1/2" or 3/4" Ballcock / Float Valve

    6 inch diameter plastic float / ball for use with standard 1/2 inch or 3/4 inch BS1212 ballcock / float valve.

    Brass threaded insert.

    Colour may vary red / blue.

    £5.98

    6" Ball Float For 1/2" or 3/4" Ballcock / Float Valve

    6" Ball Float For 1/2" or 3/4" Ballcock / Float Valve

    6 inch diameter plastic float / ball for use with standard 1/2 inch or 3/4 inch BS1212 ballcock / float valve.

    Brass threaded insert.

    Colour may vary red / blue.

    £5.98

  • 15mm x 1/2" BSP Female x 15mm Compression Tee

    15mm x 1/2" BSP Female x 15mm Compression Tee

    Brass 15mm compression tee fitting with 1/2 inch BSP female thread on the end.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £5.83

    15mm x 1/2" BSP Female x 15mm Compression Tee

    15mm x 1/2" BSP Female x 15mm Compression Tee

    Brass 15mm compression tee fitting with 1/2 inch BSP female thread on the end.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £5.83

  • 15mm x 15mm x 1/2" BSP Female Compression Tee

    15mm x 15mm x 1/2" BSP Female Compression Tee

    Brass 15mm compression tee fitting with 1/2 inch BSP female threaded connection on the branch.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £3.24

    15mm x 15mm x 1/2" BSP Female Compression Tee

    15mm x 15mm x 1/2" BSP Female Compression Tee

    Brass 15mm compression tee fitting with 1/2 inch BSP female threaded connection on the branch.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £3.24

  • 22mm x 22mm x 1/2" BSP Female Compression Tee

    22mm x 22mm x 1/2" BSP Female Compression Tee

    Brass 22mm compression tee fitting with 1/2 inch BSP female thread on the branch.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £6.28

    22mm x 22mm x 1/2" BSP Female Compression Tee

    22mm x 22mm x 1/2" BSP Female Compression Tee

    Brass 22mm compression tee fitting with 1/2 inch BSP female thread on the branch.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £6.28

296
Top