1/2" x M12 (12mm) Monobloc Tap Flexible Connector Tails

1/2
  • Click to enlarge
  • Click to enlarge

5.0 average, based on 2 reviews

£6.04

(Bulk discounts available)


Product Information
Specification
Quantity Discounts

PAIR of 12mm flexible tap connectors / tails for monobloc mixer taps.

These stainless steel braided connectors are approx 400mm long and have a M12 male metric thread with a fine 1mm pitch.

Please note that monobloc taps usually have either 10mm or 12mm connections (though we do also keep the rarer 8mm type).

The other end of the flexi has a loose nut to suit 1/2" BSP thread.

To determine which you need you must measure the external thread diameter of the flexible pipe where it enters your tap fitting.

 

The hose must not be : A-Twisted, B-Squashed, C-Stretched, D-Kinked or E-Bent sharply (especially near the ends).

 

Product Code HCZ
Manufacturer Generic
Condition New
Weight 0.200kg
Brand Generic

You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.


Quantity Price per unit
5+ £5.04


Customer Reviews

Average Rating: 5

Just what I needed.

1 2 3 4 5
Bought a replacement kitchen tap that came with copper tails. Old tap had 400mm M10 flexible tails, so bought these just to do a straight swap. Good service, ordered one day received the next, could only get 300mm tails locally. (17 Oct 2016, 17:26)

Tap tails

1 2 3 4 5
HAD A PROBLEM GETTING 12MM TAP TAIL TO 1/2 FEMALE IN THE PETERBOROUGH AREA. LOOKED ON INTERNET BUT 3 0R 4 DAYS DELIVERY. FOUND STEVENSON SITE, WAS ABLE TO PHONE AND SEE IF THEY HAD ONE IN STOCK. THAT WAS MIDAY ON A FRIDAY ARRIVED SAT A.M.. INCLUDING POSTAGE COST WAS THE LOWEST. EXCELLANT SERVICE. (18 Jan 2016, 17:14)
Write a review

Write Review

Please enter a valid email address.
This field is required.
Top