Kitchen Taps

Kitchen Taps
  • 1/2 Inch BSP Male x Female Brass Tap Extension

    1/2 inch BSP brass male x female extension socket, useful to extend tap tails or toilet cistern fill valves. BSP (British Standard Pipe Thread) sizes don’t match up with what you would measure using a ruler. Have a look at the BSPT link at the bottom of this page for more information about …

    £1.00

    £1.00

  • 1/4 Turn Monobloc Kitchen Mixer Tap

    To suit a kitchen sink with one tap hole. Easy to operate quarter turn ceramic valves. Dual flow (keeps hot and cold separate until the end of the spout outlet). Chrome plated. Includes pair of flexible tap connectors and mounting bracket.

    £49.88

    £49.88

  • Armitage Shanks Starlite 2 Drive Insert | Tap Head Carrier

    Armitage Shanks spline drive insert / tap head carrier. 20 internal splines. These inserts are sold individually, Starlite 2 is the name of the item, not the quantity.  

    £2.49

    £2.49

  • Bathroom and Kitchen Tap Repair / Conversion Kit

    Universal tap repair and conversion kit, suitable for most 1/2 inch kitchen sink and bathroom wash hand basin taps (suits most newer bath taps too). This is a complete set of 2 tap mechanisms (hot and cold) with chrome plated heads. An excellent item to repair or update worn out taps. …

    £9.99

    £9.99

  • Chrome Tap Hole Stopper | 43mm Cover 16mm Screw

    Mirror chrome finish stainless steel sink / bath / basin taphole blanking plate.   Use this to blank off any hole not used on a stainless steel kitchen sink top. Fitting is chrome finish on metal with metal screwed stay, rubber washer and plastic retaining nut. Cover diameter 43mm. …

    £3.33

    £3.33

  • Chrome Tap Hole Stopper | 43mm Cover 40mm Screw

    Mirror finish stainless steel sink / bath / basin taphole blanking plate. Use this to blank off a tap hole not used on a sink, basin, or bath. Fitting is chrome finish on metal with metal screwed stay, rubber washer and plastic retaining nut. Cover diameter 43mm. Diameter of screwed part…

    £3.34

    £3.34

  • High Neck Kitchen Taps | Pair

    Standard high neck kitchen taps.  Traditional design.  1/2 inch BSP thread (see BSPT link at bottom of page for info on plumbing thread sizes).  Metal head, much better than a cheap fragile plastic version. 

    £21.43

    £21.43

  • Kitchen Deck Mixer Taps

    Kitchen sink deck mixer taps. Traditional design. Standard 1/2 inch BSP thread (see link at bottom of page). Metal heads, much better than a cheap fragile plastic version. Suits a sink with two tap holes (standard 7 inches between centres).

    £42.45

    £42.45

  • Lever High Neck Kitchen Taps

    Lever high neck sink taps.  3 inch lever makes these taps very easy to operate.  Standard 1/2 inch BSP thread (see link at bottom of page).  Metal head, much better than a cheap fragile plastic version. 

    £37.08

    £37.08

  • Lever Kitchen Deck Mixer Taps

    Lever kitchen sink deck mixer tap. 3 inch levers make these taps very easy to operate. Standard 1/2 inch BSP threaded inlet connections (see BSPT link at bottom of page for info on thread sizes). Metal head, much better than a cheap fragile plastic version. Suits a sink with two h…

    £48.67

    £48.67

  • Lever Monobloc Kitchen Mixer Tap

    Chrome plated monobloc tap, suits a kitchen sink with one tap hole. Easy to operate single lever, up - down for off / on, left - right for hot / cold. Includes pair of flexible tap connectors and mounting bracket.  

    £31.68

    £31.68

  • Monobloc Kitchen Mixer Tap

    Standard mono kitchen sink mixer. To suit a kitchen sink with one tap hole. Metal heads, much better than a cheap fragile plastic version.

    £39.81

    £39.81

283
**** MORE ITEMS ****
Loading
Top