Compression Stop End Caps

Compression Stop End Caps

Use these brass compression stop end cap fittings to blank off an unused pipe.

Compression plumbing fittings do not require solder. The joint is formed by tightening a nut and olive onto a pipe, compressing the olive onto the pipe which forms the seal. They can be used on wet pipework, and are suitable for hot and cold systems.

  • 10mm Compression Stop End Cap

    10mm Compression Stop End Cap

    10mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £0.93

    10mm Compression Stop End Cap

    10mm Compression Stop End Cap

    10mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £0.93

  • 15mm Compression Fitting Blanking Disc

    15mm Compression Fitting Blanking Disc

    15mm blanking disc for compression fitting.

    £0.46

    15mm Compression Fitting Blanking Disc

    15mm Compression Fitting Blanking Disc

    15mm blanking disc for compression fitting.

    £0.46

  • 15mm Compression Stop End Cap

    15mm Compression Stop End Cap

    15mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £1.39

    15mm Compression Stop End Cap

    15mm Compression Stop End Cap

    15mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £1.39

  • 22mm Compression Fitting Blanking Disc

    22mm Compression Fitting Blanking Disc

    22mm blanking disc for compression fitting.

    £0.75

    22mm Compression Fitting Blanking Disc

    22mm Compression Fitting Blanking Disc

    22mm blanking disc for compression fitting.

    £0.75

  • 22mm Compression Stop End Cap

    22mm Compression Stop End Cap

    22mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £1.92

    22mm Compression Stop End Cap

    22mm Compression Stop End Cap

    22mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £1.92

  • 28mm Compression Fitting Blanking Disc

    28mm Compression Fitting Blanking Disc

    28mm blanking disc for compression fitting.

    £1.26

    28mm Compression Fitting Blanking Disc

    28mm Compression Fitting Blanking Disc

    28mm blanking disc for compression fitting.

    £1.26

  • 28mm Compression Stop End Cap

    28mm Compression Stop End Cap

    28mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £3.07

    28mm Compression Stop End Cap

    28mm Compression Stop End Cap

    28mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £3.07

  • 8mm Compression Stop End Cap

    8mm Compression Stop End Cap

    8mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £0.82

    8mm Compression Stop End Cap

    8mm Compression Stop End Cap

    8mm compression stop end cap.

    Compression plumbing fittings do not require heat or solder. They can be used with copper or plastic pipe and are suitable for hot and cold systems.

    £0.82

95
Top