Your basket is empty.
Tapered tail washer for 1/2 inch bottom entry toilet cistern float / ballcock valve.
Inside diameter is approx 22mm.
Float / ballcock valve tail washer for 1/2 inch valve.
Goes behind the valve seat.
Measures approx 7/8 inch / 22mm OD
Washer for 1/2 inch part 1 BS1212/1 high pressure ballcock / float valve .
Dimensions : approx 1/2 inch x 1/8 inch (12.7mm x 3.3mm) colour may vary.
Low pressure washer for old type BS1212 1/2 inch float / ballcock valve.
Measures approx 3/4 inch x 1/8 inch (19mm x 3.3mm).
Diaphragm washer for BS1212 brass part 2 or plastic part 3 fill / float / ballcock valve.
Replacing this washer can often fix problems with slow filling WC toilet cisterns and ballcock valves that won't shut off.
32mm (1-1/4 inch) diameter.
Diaphragm washer for Thomas Dudley Hydroflo toilet cistern inlet / fill / float / ballcock valve.
Colour of plastic insert may vary.
Diaphragm washer for Opella / Fluidmaster WC toilet cistern syphon.
Twin pack of Armitage Shanks / Ideal Standard toilet cistern ballcock / fill float valve diaphragm washers
Hushflow diaphragm suits the older screw cap (quiet) ballcock valve.
Univalve diaphragm suits the newer twist cap valve.
Armitage Shanks / Ideal Standard Univalve toilet cistern inlet / fill / ballcock valve diaphragm washer.
Suits the newer Univalve twist cap inlet valve / ballcock supplied with many Armitage and Ideal WC toilet cisterns. It will not fit the older Hushflow screw top valve.
Armitage Shanks / Ideal Standard Hushflow quiet toilet cistern inlet / fill / float / ballcock valve diaphragm washer.
Suits the older screw cap style of inlet valve supplied with many Armitage and Ideal WC toilet cisterns. It will not fit the newer Univalve twist top valve.
Fluidmaster 242MP071 toilet cistern inlet / fill / ballcock valve diaphragm washer / seal, suitable for high and low water pressure.
For use with Fluidmaster float valve models 400 and 747.
Diaphragm washer for all current Siamp toilet cistern inlet / fill / float / ballcock valves, including 95 95L 99T 99B & 99.
Siamp valves are often fitted to toilets manufactured by B&Q, Twyford, Duravit, Laufen and more.
Diaphragm washer for Torbeck WC toilet cistern inlet / fill / float / ballcock valve.
This is the new version of the diaphragm, though if needed it can easily be converted to the old type by simply removing the little plastic pin.
Diaphragm washer for Wirquin Jollyfill / Topy toilet cistern inlet / fill / float / ballcock valve.
Wisa toilet cistern inlet / fill / ballcock / float valve rubber diaphragm washer / membrane with support plate.
Fibre washer for central heating pump / pump valves.
Measures approx 44mm OD.
Pack of 2 rubber washers for central heating pump valves.
These washers measure approx 44mm outside diameter.
Special close coupled plate kit to suit many handle flush Armitage Shanks and Ideal Standard toilets.
Used to make the connection between your close coupled toilet cistern and pan.
Kit includes : plate, nuts and bolts and a doughnut washer.
Close coupled toilet cistern to pan plate kit, used to make the connection between your close coupled WC toilet cistern and pan.
Suits older, handle flush, type toilets.
Kit includes : metal plate, nuts, bolts and a doughnut washer.
This special large sized rubber doughnut washer is the seal between the close coupled toilet cistern and pan in many older (handle flush) Ideal Standard and Armitage Shanks toilets.
Approx 15mm thick and 110mm outside diameter.
Foam doughnut washer, creates water tight seal between WC toilet cistern and pan in lever handle type close coupled toilet systems.
Approx 85mm OD, 55mm ID, 14mm thick.
Rubber doughnut washer, creates water tight seal between WC toilet cistern and pan in lever handle type close coupled toilet systems.
Often needed if you have had the cistern separated from the pan for maintenance work.
Large foam doughnut washer, outside diameter approx 107mm, inside diameter approx 67mm, approx 14mm thick.
Suits many modern WC toilet flush valves, including Siamp Optima 49 & 50, Skipper 45 and Storm 33a.
Sealing ring for low level WC toilet flush pipe.
Makes the seal where the flush pipe connects to the syphon.
Rubber washer for air extractor units in old double trap syphonic / siphonic toilets / WCs.
This is the universal type, which fits a few different aspirator /airex / syphon bomb units, you might need to make the hole in the middle a little bit bigger.
Rubber syphon tail sealing washer - makes the joint between the bottom of the siphon and the toilet cistern.
Approx 45mm inside diameter, fit is over a 1-1/2 inch male BSP thread.
Diaphragm washer for Armitage Shacks WC toilet cistern syphon.
Dimensions: approx 5-1/2 inch (140mm) long x 3-1/4 inch (83mm) wide.
D shape diaphragm washer for Derwent Macdee Metro WC toilet cistern syphon.
Dimensions :approx 122mm x 89mm.
This diaphragm washer suits standard and 3 part versions of the oblong shaped Derwent Macdee Metro WC toilet cistern syphon.
Dimensions : approx 140mm x 82mm, centre hole 14mm diameter.
Round diaphragm washer for Derwent Macdee Metro WC toilet cistern syphon.
Dimensions : approx 120mm diameter.
Square diaphragm washer for Derwent Macdee Metro WC toilet cistern syphon.
Dimensions : approx 117mm x 117mm.
Diaphragm washer for Ideal Standard Freeflo / Freeflow WC toilet cistern syphon.
Dimensions :approx 116mm long x 105mm wide.
Ideal Standard Jetflow / Jetflo type diaphragm washer for your WC toilet cistern syphon.
Dimensions : approx 4-3/4 inch x 3-1/2 inch (122mm x 89mm).
Round diaphragm washer for WC toilet cistern syphon.
These washers measure 4-5/8 inch (118mm) in diameter, they are designed to fit a 4-1/2 inch syphon, though if it is a tight fit, you may need to trim slightly with sharp scissors.
5 inch round diaphragm washer for WC toilet cistern syphon.
Diaphragm washer for Shires WC toilet cistern syphon.
Dimensions :approx 146mm x 90mm.
Diaphragm washer for Thomas Dudley Turbo 11 (rubberwell) WC toilet cistern syphon.
Approx 147mm x 91mm.
Diaphragm washer for Thomas Dudley Turbo 44 WC toilet cistern syphon.
Diaphragm washer for Thomas Dudley Turbo 88 / Cascade WC toilet cistern syphon.
Dimensions approx: 138mm x 85mm.
Diaphragm washer for Twyford WC toilet cistern syphon.
Dimensions :approx 132mm x 76mm.
Replacement rubber seal for 008445 Franke / Lira basket strainer plug (supplied with many Franke kitchen sinks made before September 2008).
These washers have the markings L.I.R.A Italy and No. 00252 S
Garden hose pipe quick connector replacement rubber O ring seal.
Compatible with Hozelock type garden hose fittings.
The size of this immersion heater element washer relates to a British Standard Pipe Thread. It fits over a 2-1/4 inch BSP thread.
Approx 66mm inside diameter.
1/2 inch poly washer.
Note this size refers to a British Standard Pipe Thread see BSPT link at bottom of page for info.
This washer fits OVER a 1/2 inch male BSP thread, the washer itself does not measure 1/2 inch.
3/4 inch poly washer.
This washer fits OVER a 3/4 inch male BSP thread, the washer itself does not measure 3/4 inch.
1 inch poly washer.
This washer fits OVER a 1 inch male BSP thread, the washer itself does not measure 1 inch.
1-1/4 inch poly washer.
This washer fits OVER a 1-1/4 inch male BSP thread, the washer itself does not measure 1-1/4 inch !
1-1/2 inch poly washer.
This washer fits OVER a 1-1/2 inch male BSP thread, the washer itself does not measure 1-1/2 inch.
Basin Mate seal kit - used to seal a slotted waste fitting in a standard china bathroom wash hand basin.
This is traditionally a very difficult place to seal, this 3 part kit makes it easy.
1/2 inch rubber washer.
Pack of 10 replacement rubber sealing washers for shower hoses and heads.
Seals the ends of standard 1/2 inch BSP shower hose.
Approx dimension : 20mm diameter.
Siamp Optima 49 / 50 toilet flush valve outlet seal.
This is the seal that holds the water in the cistern. If your toilet cistern empties slowly on its own, this seal can be the problem.
Siamp Skipper 45 / Storm 33A toilet flush valve outlet seal.
This is the rubber seal that holds the water in the cistern. If your toilet cistern empties slowly on its own, this seal can be the problem.
This split klick top hat washer suits 1/2 inch and 3/4 inch BSP threads (basin, sink and bath taps).
Special design makes it easier to fit to existing taps without disconnecting the water supply.
The unique Split Klick centralising washer automatically locates the tap in the correct position.
The centralising washer makes the fitting and installing of taps easier, quicker and with a stronger result.
1/2 inch delta tap washer - special profile washer for delta taps.
1/2 inch dome tap washer.
Dimension : approx 17mm diameter (the name of the washer does not match up with its actual physical size).
Brass tap jumper with flat washer - for older 1/2 inch BS1010 bathroom basin / kitchen sink taps.
Approx physical dimension : 3/4 inch diameter (the name of the item does not match up with its actual size).
Brass tap jumper and flat washer, for older 3/4 inch BS1010 bath taps.
Approx physical dimension : 25mm / 1 inch diameter (the name of the item does not match up with its actual size).
This 3/8 inch flat tap washer is used in many newer bathroom basin and kitchen sink taps.
Approx physical dimension : 5/8 inch / 15.8mm diameter (the name of the washer does not match up with its actual size).
This flat tap washer is used in many older bathroom basin, kitchen sink taps and 1/2 inch BS1010 outside taps.
Approx physical dimension : 3/4 inch / 18.6mm diameter (the name of the washer does not match up with its actual size).
5/8 inch flat tap washer.
Approx physical dimension : 7/8 inch / 21.5mm diameter (the name of the washer does not match up with its actual size).
This 3/4 inch flat tap washer is used in many older bath taps.
Approx physical dimension : 1 inch / 25mm diameter (the name of the washer does not match up with its actual size).
This washer is used in many drain cock valves, though check the size as some valves need a different sized washer
Physical dimension of washer : 13.5mm diameter.
Universal plastic top hat washer, suits 1/2 inch and 3/4 inch BSP threads (basin, bath and kitchen sink taps).
Stop your taps from coming loose.
Flat 1-1/4 inch trap inlet washer.
This washer makes the seal between the trap and waste fitting on your bathroom basin.
Outlet washer for 1-1/4 inch bathroom basin trap, with cone / taper profile.
Flat 1-1/2 inch trap inlet washer.
This washer makes the seal between the trap and waste fitting on your bath or sink.
1-1/2 inch trap outlet washer. Coned / tapered profile.
Washer for washing machine / dishwasher inlet hose ends, with built in filter.
Mesh filter screen helps stop harmful grit and dirt entering your appliance.
Replacement rubber washer for washing machine / dishwasher inlet hose ends.
Approx dimension : 24mm outside diameter.
Rubber O rings for sealing gaps between two surfaces. Use to create air and watertight seal between materials or objects.
Multiple applications from plumbing to watch repair.
Includes assorted sizes 6 to 57mm.
Handy storage case with compartments.
SV01967 Ideal standard flush valve seal and clip.
This replacement flush valve seal suits a large range of Ideal Standard and Armitage Shanks toilet cistern flush valves.