Back

Push-Fit Waste Pipe Fitting Reducers

Push-Fit Waste Pipe Fitting Reducers

Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit solvent weld pipework).

Waste pipe size is described by the nominal internal bore of the pipe. The outside diameter of the pipe is a bit bigger.

  • 110mm x 32mm (1-1/4") Or 40mm (1-1/2") Rubber Reducer

    110mm x 32mm (1-1/4") Or 40mm (1-1/2") Rubber Reducer

    The DS25 will accept two waste pipes of either 32mm to 40mm. It is made from flexible EPDM and manufactured with one inlet open and one closed (the closed inlet can be opened with a sharp knife). The DS25 can be fitted into a drain socket by replacing the existing ring seal, or inside…

    £6.09

    110mm x 32mm (1-1/4") Or 40mm (1-1/2") Rubber Reducer

    110mm x 32mm (1-1/4") Or 40mm (1-1/2") Rubber Reducer

    The DS25 will accept two waste pipes of either 32mm to 40mm. It is made from flexible EPDM and manufactured with one inlet open and one closed (the closed inlet can be opened with a sharp knife). The DS25 can be fitted into a drain socket by replacing the existing ring seal, or inside…

    £6.09

  • 32mm (1-1/4") x 21.5mm (3/4") Push-fit Fitting Reducer

    32mm (1-1/4") x 21.5mm (3/4") Push-fit Fitting Reducer

    32mm (1-1/4 inch) x 21.5mm (3/4 inch) push fit fitting reducer. Colour may vary. Pushes into a 1-1/14 inch push fit waste fitting to allow it to accept 3/4 inch pipe. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not…

    £1.36

    32mm (1-1/4") x 21.5mm (3/4") Push-fit Fitting Reducer

    32mm (1-1/4") x 21.5mm (3/4") Push-fit Fitting Reducer

    32mm (1-1/4 inch) x 21.5mm (3/4 inch) push fit fitting reducer. Colour may vary. Pushes into a 1-1/14 inch push fit waste fitting to allow it to accept 3/4 inch pipe. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not…

    £1.36

  • 40mm (1-1/2") x 21.5mm (3/4") Push-fit Fitting Reducer

    40mm (1-1/2") x 21.5mm (3/4") Push-fit Fitting Reducer

    40mm (1-1/2 inch) x 21.5mm (3/4 inch) push-fit fitting reducer.

    Colour may vary.

    Pushes into a 1-1/2 inch push fit waste fitting to allow it to accept 3/4 inch pipe.

    £2.21

    40mm (1-1/2") x 21.5mm (3/4") Push-fit Fitting Reducer

    40mm (1-1/2") x 21.5mm (3/4") Push-fit Fitting Reducer

    40mm (1-1/2 inch) x 21.5mm (3/4 inch) push-fit fitting reducer.

    Colour may vary.

    Pushes into a 1-1/2 inch push fit waste fitting to allow it to accept 3/4 inch pipe.

    £2.21

  • 40mm (1.1/2") x 32mm (1.1/4") Push-fit Fitting Reducer

    40mm (1.1/2") x 32mm (1.1/4") Push-fit Fitting Reducer

    40mm (1.1/2 inch) x 32mm (1.1/4 inch) push fit fitting reducer, available in white, black or grey. Pushes into a 1.1/2 inch fitting to let it accept 1.1/14 inch pipe. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit…

    £1.27

    40mm (1.1/2") x 32mm (1.1/4") Push-fit Fitting Reducer

    40mm (1.1/2") x 32mm (1.1/4") Push-fit Fitting Reducer

    40mm (1.1/2 inch) x 32mm (1.1/4 inch) push fit fitting reducer, available in white, black or grey. Pushes into a 1.1/2 inch fitting to let it accept 1.1/14 inch pipe. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit…

    £1.27

  • 50mm (2") x 32mm (1.1/4") Push-fit Fitting Reducer

    50mm (2") x 32mm (1.1/4") Push-fit Fitting Reducer

    50mm (2 inch) x 32mm (1.1/4 inch) push-fit fitting reducer, pushes into a 2 inch fitting to let it accept 1.1/4 inch pipe. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit solvent weld pipework). The size of push…

    £2.74

    50mm (2") x 32mm (1.1/4") Push-fit Fitting Reducer

    50mm (2") x 32mm (1.1/4") Push-fit Fitting Reducer

    50mm (2 inch) x 32mm (1.1/4 inch) push-fit fitting reducer, pushes into a 2 inch fitting to let it accept 1.1/4 inch pipe. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit solvent weld pipework). The size of push…

    £2.74

  • 50mm (2") x 40mm (1-1/2") Push-fit Fitting Reducer

    50mm (2") x 40mm (1-1/2") Push-fit Fitting Reducer

    50mm (2 inch) x 40mm (1-1/2 inch) push fit fitting reducer, pushes into a 2 inch fitting to let it accept 1-1/2 inch pipe. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit solvent weld pipework). The size of push…

    £2.74

    50mm (2") x 40mm (1-1/2") Push-fit Fitting Reducer

    50mm (2") x 40mm (1-1/2") Push-fit Fitting Reducer

    50mm (2 inch) x 40mm (1-1/2 inch) push fit fitting reducer, pushes into a 2 inch fitting to let it accept 1-1/2 inch pipe. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit solvent weld pipework). The size of push…

    £2.74

209
Top