Toilet Syphons

8" Toilet Syphon | Internal Overflow & Dual Flush

Internal overflow toilet cistern flushing siphon.

8 inch refers to the internal overflow bridge and not the overall height.

Overall height inside toilet cistern is approx 9-1/2 inch (not including the threaded part, which is outside / below the cistern).

£7.87

9" Toilet Syphon | Internal Overflow & Dual Flush

Internal overflow toilet cistern flushing siphon.

9 inch refers to the internal overflow bridge and not the overall height.

Overall height inside toilet cistern is approx 10-1/2 inches (not including the threaded part, which is outside the cistern).

£7.52

Close Couple Kit

Close couple toilet / WC cistern to pan plate kit, used to make the connection between your close coupled toilet cistern and pan.

Suits older, handle flush, type toilets.

Kit includes : metal plate, nuts, bolts and a doughnut washer.

£4.41

Close Couple Kit for Ideal Standard Toilet

Special plate kit to suit many handle flush Armitage Shanks and Ideal Standard toilets.

Used to make the connection between your close coupled WC / toilet cistern and pan.

£6.69

Derwent Macdee Metro 3 Part Syphon - D SHAPE Bell

Derwent Macdee Metro 3 part syphon with D shaped bell housing.

Metro Rapid has an easy to remove upper section allowing easy maintenance / replacement without the need to remove the cistern.

£19.90

Derwent Macdee Metro 3 Part Syphon - Oblong Bell

Derwent Macdee Metro 3 part toilet cistern syphon with oblong bell.

Metro Rapid has an easy to remove upper section allowing easy maintenance / replacement without the need to remove the cistern.

£19.90

Derwent Macdee Metro 3 Part Syphon - Round Bell

Derwent Macdee Metro 3 part syphon with round bell housing.

Metro Rapid has an easy to remove upper section allowing easy maintenance / replacement without the need to remove the cistern.

£19.90

Derwent Macdee Metro 3 Part Syphon - Square Bell

Derwent Macdee Metro 3 part syphon with square bell housing.

Metro Rapid has an easy to remove upper section allowing easy maintenance / replacement without the need to remove the cistern.

£19.90

Foam Doughnut Washer for Close Coupled Toilet

Foam doughnut (donut) washer, used between toilet cistern and pan in lever flush handle type close coupled WC systems.

Approx 85mm OD, 55mm ID, 14mm thick.

£2.35

Rubber Doughnut Washer For Armitage / Ideal Standard Toilet

This special large sized rubber donut washer is the seal between the close coupled cistern and pan in many Ideal Standard and Armitage Shanks toilets.

Approx 15mm thick and 110mm outside diameter.

£3.33

Rubber Doughnut Washer for Close Coupled Toilet

Rubber doughnut (donut) washer, used between cistern and toilet pan in lever handle type close coupled WC systems.

Often needed if you have had the cistern separated from the pan for maintenance work.

£2.54

Syphonic Toilet Airex Syphon Bomb Washer

Rubber washer for air extractor units in old double trap syphonic toilets / WCs.

This is the universal type, which fits a few different aspirator / airex units, you might need to make the hole in the middle a little bit bigger.

£4.74

Toilet Syphon C Link / Hook Large Size

This is the wire that connects your toilet flush handle and syphon together.

Called a C Link, as it looks like the letter C.

Approx 115mm long.

£0.98

Toilet Syphon C Link / Hook Medium Size

This is the wire that connects your toilet flush handle and syphon together.

Called a C link as it looks like the letter C.

Approx 90mm long.

£0.93

Toilet Syphon C Link / Hook Small Size

This is the wire that connects your toilet flush handle and syphon together.

Called a C link, as it looks like the letter C.

Approx 65mm long.

£0.66

Toilet Syphon Outlet / Tail Rubber Washer

Rubber syphon tail sealing washer - makes the joint between the bottom of the syphon and the toilet cistern.

Approx 45mm inside diameter, fit is over a 1-1/2 inch male BSP thread.

£0.62