1/2 Inch BSP Brass Gate Valve | FxF

1/2 Inch BSP Brass Gate Valve | FxF
  • Click to enlarge
  • Click to enlarge

£2.95

(Bulk discounts available)


Product Information
Specification
Quantity Discounts

1/2 inch BSP gate valve.

A gatevalve is designed for use in low pressure systems where the pressures involved are only a few metres head (less than 1 bar). They are usually used to temporarily turn off supplies for maintenance. When the valve is open, the gate gets fully drawn up into the valve, which leaves an opening that is about the same size as the pipe installed in the valve. This allows water to freely flow, since there is little restriction in the valve.  When the valve is closed the gate is down - though often the seal is not completely perfect.

BSP (British Standard Pipe Thread) sizes do not match up with what you would measure using a ruler. Have a look at the BSPT link at the bottom of this page for more information about how plumbing threads are measured.

Product Code FMH
Manufacturer Generic
Condition New
Weight 0.150kg
Brand Generic

You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.


Quantity Price per unit
10+ £2.90


Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.
Top