Gate Valves

Gate Valves

Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar). They are used to temporarily turn off supplies for maintenance. When the valve is open, the gate gets fully drawn up into the valve, which leaves an opening that is about the same size as the pipe installed in the valve. This allows water to freely flow, since there is little restriction in the valve. When the valve is closed the gate is down - though often the seal is not completely perfect.

  • 1.1/2" BSP Gate Valve

    1.1/2" BSP Gate Valve

    Brass 1.1/2 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £25.13

    1.1/2" BSP Gate Valve

    1.1/2" BSP Gate Valve

    Brass 1.1/2 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £25.13

  • 1.1/4" BSP Gate Valve

    1.1/4" BSP Gate Valve

    Brass 1.1/4 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £18.15

    1.1/4" BSP Gate Valve

    1.1/4" BSP Gate Valve

    Brass 1.1/4 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £18.15

  • 1/2" BSP Gate Valve

    1/2" BSP Gate Valve

    Brass 1/2 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £2.95

    1/2" BSP Gate Valve

    1/2" BSP Gate Valve

    Brass 1/2 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £2.95

  • 1" BSP Gate Valve

    1" BSP Gate Valve

    Brass 1 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £5.37

    1" BSP Gate Valve

    1" BSP Gate Valve

    Brass 1 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £5.37

  • 15mm Gate Valve

    15mm Gate Valve

    15mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £2.88

    15mm Gate Valve

    15mm Gate Valve

    15mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £2.88

  • 2" BSP Gate Valve

    2" BSP Gate Valve

    Brass 2 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £30.55

    2" BSP Gate Valve

    2" BSP Gate Valve

    Brass 2 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £30.55

  • 22mm Gate Valve

    22mm Gate Valve

    22mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £3.08

    22mm Gate Valve

    22mm Gate Valve

    22mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £3.08

  • 28mm Gate Valve

    28mm Gate Valve

    28mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £5.98

    28mm Gate Valve

    28mm Gate Valve

    28mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £5.98

  • 3/4" BSP Gate Valve

    3/4" BSP Gate Valve

    Brass 3/4 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £3.25

    3/4" BSP Gate Valve

    3/4" BSP Gate Valve

    Brass 3/4 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £3.25

  • 3/8" BSP Gate Valve

    3/8" BSP Gate Valve

    Brass 3/8 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £4.94

    3/8" BSP Gate Valve

    3/8" BSP Gate Valve

    Brass 3/8 inch BSP gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £4.94

  • 35mm Gate Valve

    35mm Gate Valve

    35mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £20.78

    35mm Gate Valve

    35mm Gate Valve

    35mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £20.78

  • 42mm Gate Valve

    42mm Gate Valve

    42mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £25.23

    42mm Gate Valve

    42mm Gate Valve

    42mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £25.23

  • 54mm Gate Valve

    54mm Gate Valve

    54mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £38.08

    54mm Gate Valve

    54mm Gate Valve

    54mm compression copper to copper brass gate valve.

    Gate valves are designed for use with water in low pressure systems where the pressures involved are only a few metres head (less than 1 bar).

    £38.08

27
Top