15mm x 1/2" BSP Wall Plate Elbow for Outside Tap

This brass wall plate elbow fitting is also known as a wing-back or backplate elbow. The 15mm compression inlet connection suits copper and plastic pipe, 1/2 inch female BSP threaded outlet connection for outside tap / bib tap.

Manufacturer recommends this item is only for use as part of an outside tap installation.

Compression plumbing fittings do not require heat or solder. The joint is formed by tightening a nut and compressing the olive (included with fitting) onto a copper or plastic pipe, which forms the seal. They can be used on wet pipework, and are suitable for hot and cold systems.

** BSP thread sizes are measured a special way - have a look at our information page for more details **